m-use voor/achter camera control box

m-use voor/achter camera control box

Control box with front view camera trigger input and switched +12V output. Operating Voltage: 12V DC.

Camera switching unit which has the ability to control both a front and rear view camera.
The switching unit outputs the image from the rear view camera when reverse gear is engaged and automatically switches to the front view camera image which stays on for 10 seconds when reverse gear is disengaged. The switching unit has a front view camera trigger input which enables the user to activate just the front camera image. The unit also provides a switched +12V output when either the front or rear camera is active which provides an ideal power source for the display monitor.
Operating Voltage: 12V DC (Negative Ground) Current consumption: 235mA @ 13.8V Stand-by current: 45mA @ 13.8V

Contents
- Camera switching unit with 0.3m cable with RCA Male video input and Male DC power connector for front view camera - RCA Female video input for rear view camera - RCA Male video output - DC power connection wires - Front view camera trigger input wire - +12V output wire

INSTALLATION 1. Connect the Black wire to a suitable ground and the Red wire to a switched +12V supply
2. Connect the Green +12v output wire to the display monitor (if required)
3. Connect the Blue front view camera trigger input wire to the brake light circuit or a separate switched +12V feed if preferred.
4. Connect the rear view cameras video output to the RCA Female video input connector which is labelled “BACK CAM” and take power from the reversing light
circuit or an interface which provides a reverse signal.
5. Connect the front view cameras video output to the RCA Male video input connector and take power from the Male DC power connector. Both which are labelled “FRONT CAM”
6. Connect the RCA Male video output connector to the display monitor