• Grootste assortiment
  • Gratis verzending boven €125,=
  • Voor 17:00 in NL of 16:00 in BE besteld, morgen in huis
  • 036-538 70 70
  • Klik op account om in te loggen
  • . .
  • . .
  • . .
Taal
Global Nederlands Global Nederlands
€
Toggle Nav Toggle Nav
Zoek

Menu

Toggle Nav
Sluiten
Brodit Vibration Dampener, Shore A 60 Hardness.Up to 1500g.
Brodit Vibration Dampener, Shore A 60 Hardness.Up to 1500g.
Brodit Vibration Dampener, Shore A 60 Hardness.Up to 1500g.
Brodit Vibration Dampener, Shore A 60 Hardness.Up to 1500g.
Brodit Vibration Dampener, Shore A 60 Hardness.Up to 1500g.
Brodit Vibration Dampener, Shore A 60 Hardness.Up to 1500g.
Brodit Vibration Dampener, Shore A 60 Hardness.Up to 1500g.

Brodit Vibration Dampener, Shore A 60 Hardness.Up to 1500g.

Artikelnummer
216274
AVP incl. € 17,95
Vibration damper

Vibration dampeners, Shore A 60 Hardness. For installations weighing up to 1500g. With AMPS-holes.

An accessory for reducing vibrations and bumps, for use in rough environments. Is to be placed between the holder and the Pedestal Mount. Can be used for installations weighing up to 1500g. Builds 17 mm. AMPS holes. Color: Black. Made of rubber and metal. Made in Sweden.

Gegevens
Meer informatie
Meer informatie
Accessoiremerk Brodit
Barcode 7320282162740
Adviesverkoopprijs incl. BTW 17,95
Pedestal eigenschap trillingsdemper
Compatibility
Instructies
1. Mount the Vibration dampener: Place the Vibration dampener onto the desired position. Screw the Vibration dampener into place, for mounting surface ≤ 3mm thick use the short screw.
2. Mount the Vibration dampener onto a MultiMoveClip: Place the MultiMoveClip onto the desired position and screw into place, for mounting surface ≤ 3mm thick use the short screw.
3. Mount the Vibration dampeners onto a holder with tilt swivel: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the mounting plate onto the Vibration dampeners. Use the short screw with small head to attach the Vibration dampener onto the mounting plate. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw so the holder is firmly in place, but still can be adjusted.
4. The Vibration dampener is in place.
Scroll to top